The Six String Revival blog

Straight answers from the repair bench

The guitar questions we hear most, answered honestly. That includes which DIY fixes to try, which to leave alone, and what's really going on when your guitar won't play right.

A T-style electric guitar on the Six String Revival workbench surrounded by repair tools
Start here · DIY Repair

10 DIY Guitar Repairs That Most Often Go Wrong (and What to Do Instead)

The DIY guitar repairs that fail most often, from cranked truss rods and over-filed nut slots to super-glued bridges and cold solder joints. What goes wrong, why, and what to do instead.

November 15, 2026 · 8 min read
Close-up of polished frets on a rosewood fretboard
Troubleshooting

Why Does My Guitar Buzz? A Fret-by-Fret Diagnosis Guide

Where your guitar buzzes tells you why. Find out what causes buzz on open strings, low frets, high frets or one single note, which fixes you can try yourself, and when it needs a setup or fretwork.

November 15, 2026 · 5 min read
Fresh strings being installed on an Epiphone headstock during a setup
Setups

How Often Should You Get a Guitar Setup? (And What's Included)

What a guitar setup actually is, how often you need one, the signs your guitar is overdue, and what a setup costs at a Spokane repair shop.

November 15, 2026 · 4 min read
A black electric guitar on the workbench ready for a neck adjustment
DIY Repair

How to Adjust a Truss Rod Safely (and When Not To)

What a truss rod does, how to measure neck relief, which way to turn it, how far, and the warning signs that mean you should stop and let a repair shop take over.

November 15, 2026 · 5 min read
A sunburst acoustic guitar on the Six String Revival workbench
Guitar Care

Guitar Humidity Guide for Spokane: Cracks, Lifting Bridges and Sharp Fret Ends

Why dry Spokane winters crack acoustic guitars, cause sharp fret ends and fret buzz, what humidity level guitars need, and how to protect yours without overdoing it.

November 15, 2026 · 4 min read
A soldering iron working on the wiring inside a guitar control cavity
Electronics

Scratchy Knobs, Signal Cutting Out and DIY Wiring Mistakes: Guitar Electronics Explained

Why guitar knobs get scratchy, why a guitar cuts out or hums, how to tell a dead pickup from a bad wire, and the soldering and wiring mistakes that sink most DIY pickup swaps.

November 15, 2026 · 5 min read
A sunburst single-cut electric guitar resting in its case
History

What Is a Luthier? A Short History of Guitar Making and Repair

Where the word luthier comes from, how the modern guitar took shape from Torres and Martin to Gibson and Fender, why old guitars were built to be repaired, and how a luthier differs from a guitar tech.

November 15, 2026 · 5 min read

Popular questions

CallText